Database repair on the Telex Network Recorder

[#1]

Question

How do I repair the database on the Telex Network Recorder?

Answer

To repair the database, follow the steps below:
1. Open the database reviewer program and press and hold F9, then press F11, this will enable the repair options under the maintenance menu.
2. Click on "Maintenance"
3. Click on "Repair Database 1" , press OK at the prompt. Note: Time to complete will vary based on database size.
4. Click on "Repair Database 3" , press OK at the prompt. Note: Time to complete will vary based on database size.
5. After "Repair Database 3" is done, reboot the computer.
6. Restart the network recorder, you should now be able to access the Database and NR should be recording files again.

NOTE: You should also perform these steps before any software upgrades to Network Recorders .

© Copyright Bosch Security Systems

All rights reserved. Text, images, graphics, sound, animations and videos as well as the arrangement of the same in Bosch offline knowledgebase (help file) are protected by copyright and other intellectual property rights. The content of these offline knowledgebase may not be copied, disseminated, altered or made accessible to third parties for commercial purposes. Some Bosch web sites may also contain text, images, graphics, sound, animations and videos subject to third party copyrights.

Warranty Note

This information is provided by Bosch Security Systems ''AS IS'' and without warranty of any kind, expressed or implied, including (but not limited to) any implied warranties of merchantability, fitness for any particular purpose or non-infringement. While the information provided in believed to be accurate, it may include errors or inaccuracies. Bosch Security Systems will not be liable for any damages of any kind arising from use of this tool, including, but not limited to, direct, indirect, incidental, punitive and consequential damages.