- Top Results
Answer
In 2 wire mode the wires are connected to the DB-25 connector at pins 13 and 25. In 4 wire mode the TX pair is connected to DB-25 pins 13 and 25, and the RX pair is connected to pins 12 and 24.
The corresponding radio connections will be specified by the manufacturer. Some models have built in tone remote adapter boards, and some may require a tone remote adapter board between the IP-223 and the radio.
© Copyright Bosch Security Systems
All rights reserved. Text, images, graphics, sound, animations and videos as well as the arrangement of the same in Bosch offline knowledgebase (help file) are protected by copyright and other intellectual property rights. The content of these offline knowledgebase may not be copied, disseminated, altered or made accessible to third parties for commercial purposes. Some Bosch web sites may also contain text, images, graphics, sound, animations and videos subject to third party copyrights.
Warranty Note
This information is provided by Bosch Security Systems ''AS IS'' and without warranty of any kind, expressed or implied, including (but not limited to) any implied warranties of merchantability, fitness for any particular purpose or non-infringement. While the information provided in believed to be accurate, it may include errors or inaccuracies. Bosch Security Systems will not be liable for any damages of any kind arising from use of this tool, including, but not limited to, direct, indirect, incidental, punitive and consequential damages.
