Answer
To change the time on the IP-1616 follow these steps:
To set the console clock in quick mode, do the following:
1. On the IP-1616 keypad, press and hold the MUTE button, F16 button, and the XP button in that order.
2. Follow steps 3-17 in “CLK Menu” .
To change the time on the IP-2002 follow these steps:
To set the console clock in quick mode, do the following:
1. Press and hold Line 1’s MUTE button, Softkey 1, and the * button, in that order.
2. Follow steps 3-17 in “CLK Menu” .
To change the time on the C-6200 follow these steps:
To set the console clock in quick mode, do the following:
1. On the C-6200 keypad, press and hold the MUTE button, the F16 button, and the C1 button, in that order.
2. Follow steps 3-17 in “CLK Menu” .
The Programming Mode menu appears.
3. Press the CLK softkey.
The clock menu appears. Options Edit, A/P, 12/24, and back appear.
4. Press the 12/24 softkey until 12hr displays.
The 12-hour clock mode is selected. In the upper-right corner of the display, 12hr appears
OR
Press the 12/24 softkey until 24hr displays.
The 24-hour clock mode is selected. In the upper-right corner of the display, 24hr appears.
5. Press the A/P softkey to set the 12-hour clock time to AM or PM, if 12-hours clock mode is selected.
The time appears with AM or PM on the right.
6. Press the Edit softkey.
The clock settings appear on the display.
7. Press the Hours softkey.
The Hours menu appears and displays the current setting.
8. Press the 12 softkey.
The clock resets to 12 hours or 1200 hours depending on selected mode
9. Press the dwn or up softkey until correct hours displays.
The hour setting changes.
10. Press the back softkey after setting the hours.
The edit clock menu appears.
11. Press the Mins softkey.
The minutes menu appears and displays the current settings.
12. Press the 0 softkey.
The clock reset to 0 minutes.
13. Press the dwn or up softkey until correct minutes displays.
The minutes setting changes.
14. Press the back softkey after setting the hours and minutes.
The hour and minutes setting menu appears.
15. Press the back softkey.
The edit clock menu appears.
16. Press the back softkey.
The Programming Menu appears.
17. Press the EXIT softkey.
The console displays, Resetting console. Changes are saved.
© Copyright Bosch Security Systems
All rights reserved. Text, images, graphics, sound, animations and videos as well as the arrangement of the same in Bosch offline knowledgebase (help file) are protected by copyright and other intellectual property rights. The content of these offline knowledgebase may not be copied, disseminated, altered or made accessible to third parties for commercial purposes. Some Bosch web sites may also contain text, images, graphics, sound, animations and videos subject to third party copyrights.
Warranty Note
This information is provided by Bosch Security Systems ''AS IS'' and without warranty of any kind, expressed or implied, including (but not limited to) any implied warranties of merchantability, fitness for any particular purpose or non-infringement. While the information provided in believed to be accurate, it may include errors or inaccuracies. Bosch Security Systems will not be liable for any damages of any kind arising from use of this tool, including, but not limited to, direct, indirect, incidental, punitive and consequential damages.
