The IP-223 supports basic channel change, TX/RX audio and PTT for most radios. We also offer serial control of some Kenwood radios (TK-x80, -x90, -x150, -x180 and TK-5x10) that enable additional features listed below.
ANI
Channel Change (up to 99 frequencies)
Scan ON/OFF
Emergency Decode
***Scan Mode channel update*** Only on x150/x180 and TK-5x10
**Add/Delete channels from scan list** Only on x150/x180
The following optional Telex cables can help speed installation:
• P/N F.01U.117.822 Description IP223CAB150/180 - IP223-Kenwood TK-150/180 and TK-5x70 cable.
• P/N F.01U.117.823 Description IP223CAB90 - IP223-Kenwood TK-90 cable.
If attaching two (2) serially controlled devices to a single IP-223, a serial port splitter cable is
required:
• P/N F.01U.117.818 Description IP223DB9Splitter - Serial Port splitter cable DB-9.
© Copyright Bosch Security Systems
All rights reserved. Text, images, graphics, sound, animations and videos as well as the arrangement of the same in Bosch offline knowledgebase (help file) are protected by copyright and other intellectual property rights. The content of these offline knowledgebase may not be copied, disseminated, altered or made accessible to third parties for commercial purposes. Some Bosch web sites may also contain text, images, graphics, sound, animations and videos subject to third party copyrights.
Warranty Note
This information is provided by Bosch Security Systems ''AS IS'' and without warranty of any kind, expressed or implied, including (but not limited to) any implied warranties of merchantability, fitness for any particular purpose or non-infringement. While the information provided in believed to be accurate, it may include errors or inaccuracies. Bosch Security Systems will not be liable for any damages of any kind arising from use of this tool, including, but not limited to, direct, indirect, incidental, punitive and consequential damages.
