Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 


    Sort by:
    ‎06-08-2018 07:05 PM
    When a fire alarm occurs, the control panel activates Relay A (Terminal 6), providing the trigger input to the “Horn” D192C/D192G. The output from Relay A also changes Point 3’s voltage to 5.0 VDC (electrically, an open condition caused by the 2.4 k. resistor), causing an alarm (burg alarm) condition. This activates Relay B (based on the Summary Alarm Relay programming shown above). Relay B provides the trigger voltage for the “Strobe” D192C/D192G. When the Fire Alarm is acknowledged at the command center, power is no longer applied to Relay A causing the horns to silence and returning Point 3 to a normal state of 2.5 VDC. However, Relay B continues to stay activated until alarm memory is cleared at the command center by using Command 4 or entering Passcode + [ESC]. After the Fire Alarm is acknowledged, the command center first scrolls the fire alarm points, then scrolls AREA 1 1 ALARMS. This occurs because Point 3 is a Burg Point. Once a Command 4 or a Passcode + [ESC] is entered, the Alarm Memory is cleared. Part numbers D192C, D192G, D7212, D7412,D9112, D9124, D9412, D7212G, D7412G, D9112G, D9124G, D9412G
    View full article
    ‎06-08-2018 06:58 PM
    Part numbers D7036, DS9436, D56R
    View full article
    ‎06-08-2018 06:42 PM
    Part mumbers D9068, D9052, D8024, D9024, D40024, D10024A, D7033, FMR-DACT-KEYPAD
    View full article
    ‎06-08-2018 06:28 PM
    Issue What ports are used for the D9051 on the Analog panel? Solution Part numbers D10024A, D10024, D9024, D8024, D9051
    View full article
    ‎06-08-2018 06:07 PM
    Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4, DS7488
    View full article
    ‎06-08-2018 05:48 PM
    Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4, DS7447
    View full article
    ‎06-07-2018 09:54 PM
    Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4, DS7420I
    View full article
    ‎06-27-2018 05:52 PM
    The DataLock system uses lockcodes to lock panels from programming by unauthorized programmers. A Datalocked panel has a lockcode in memory that the 5200 must match to one of the lockcodes in the 5200 lockcode records before the programming session can continue. If 5200 cannot match the lockcode in the panel, the programming session is terminated.
    View full article
    ‎06-07-2018 07:13 PM
    Part numbers DS9400, DS9400i, DS9400M, D7024, FPD-7024, DS9431, D7039, FPE-7039
    View full article
    ‎06-07-2018 06:10 PM
    Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, DS9431, D7039, FPE-7039, D7053, D7035
    View full article
    ‎06-07-2018 04:10 PM
      Issue The D192G panel zone (point) is in trouble and the yellow LED is not on. Solution With the zone/point in trouble and No Yellow LED On there is a wiring fault. One of the following terminals do not have power connected to them. External Power In (EXT PWR IN) and / or Auxiliary Power In (AUX PWR IN). Terminal 1 (AUX PWR IN) 13.75 VDC Terminal 2 (Common) Terminal 3 (Supervised Zone / Point) 2.50 VDC Normal Condition < 1.50 VDC In Trouble condition Terminal 4 (Trigger) 13.75 VDC In Alarm Only Terminal 5 (External Power In) 12 VDC or 24 VDC Depended on needed Output for the NAC's or Power Supply Terminal 6 (Common) This is the Common from an 24 VDC External Power Terminal 7 (Positive Alarm Output) Terminal 8 (Negative Alarm Output) Part number D192G
    View full article
    ‎06-07-2018 03:50 PM
    Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, DS9431, D7039, FPE-7039
    View full article
    ‎06-07-2018 04:00 PM
    Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4
    View full article
    ‎06-07-2018 03:13 PM
    Part numbers D192C, D192G
    View full article
    ‎06-06-2018 08:40 PM
    Part numbers D8125, D8126, D8127, D9127, D9127U, D9127T
    View full article
    ‎06-06-2018 06:46 PM
    The D9124 is a 9000 control panel with a 24Vdc PSU and all the needed Fire Accessories for a basic system, all in one large red enclosure. See parts List below. The D9124 is made up of the following: D9112LTB, D9412LTB ,D9412GLTB, D9412GV2LTB - Control Panel D9101 - Red Enclosure D9100 - Carriers Module with the Following parts * * 2 - D192C - Bell Supervision Modules * 1 - D8125 - Popex Module * 1 - D928 - Dual Phone line Switcher * 1 - D9142LC - 24Vdc Power Supply D1256 - Fire Keypad D1601 - Hardwire Transformer
    View full article
    ‎06-06-2018 04:38 PM
    Part numbers D380
    View full article
    ‎06-06-2018 04:10 PM
    Part numbers D10024A, D10024, D9024, D8024
    View full article
    ‎06-06-2018 04:08 PM
    Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M,FPP-RNAC-8A-4C, DS9484, DS9488, D7035
    View full article
    ‎06-06-2018 03:06 PM
    Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4, ARDIS
    View full article