Fire

Part numbers D2071A, DS9471, 911A, 911AC, D2071AC, D2071AHC, D2071ACPL-1, D2071ACT, D2071AH

DACT Dialers - D9068, FPT-DACT, FPT-DACT-232, DCT-1, DCT-1E, DS9602 Keypad Programmers - FMR-DACT-KEYPAD, DS9447, D7033, DCT-P

How to configure the FPD-7024 for various network reporting options. How does the FPD-7024 Network Communication alternate between devices?

Tags: Fire, FDP-7024, IP, Path Fail, Time Sync.

Programming the FPD-7024 to report via ethernet to the CS with a DX4020 Network Card.

Part numbers D9068, Hochiki FireNET panel

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D1256

D2071, D2071A, D2071AC, D2071ACP, D2071ACPL-1, D2071ACT, D2071AH, D2071AHC, DS9471, D5200, D911, D911A

Issue Is the NOTIFIER 911 Dialer programmable with a D5200 hand-held programmer? Solution Yes, the NOTIFIER 911 Dialer can be programmed with the D5200 Programmer. Use the D2071 handler.

The programmer for the DACT family (D9068,FPT-DACT; DCT-1; DCT-1E; DS9602) is one of the following: D7033 DS9447 FMR-DACT-KEYPAD Notes The FMR-DACT-KEYPAD is not the same as the FMR-7033. The FMR-7033 will not program the D9068 DACT family (FPT-DACT; DCT-1; DCT-1E; DS9602).

Part numbers D2071A, DS9471, 911A, 911AC, D2071AC, D2071AHC, D2071ACPL-1, D2071ACT, D2071AH, D5050, D5200

Testing DACT phone lines.

Part numbers D2071A, DS9471, 911A, 911AC, D2071AC, D2071AHC, D2071ACPL-1, D2071ACT, D2071AH

Overview This article discusses the discrepancy between documented poll rates on an ITS-DX4020-G. Issue The Bosch Cellular Service User Guide states that for Fire applications we should go with a Poll rate of 240 Ack wait of 10. the current ITSDX4020-G O/I guide says Poll at 60 Ack wait 13. Which is correct? Solution 240 seconds with 10 second retries is correct for the current NFPA72 regulations for Fire. This used to be 60 seconds in the old NFPA72 standard.

Use the program menu tree shown below to program D9068 using the FMR-DACT-KEYPAD or D7033 Programming Keypad.    

Panel part numbers - FPD-7024, FPA-1000, FPA-1000-UL, and FPA-1000-V2. Network Card part numbers for the FPD-7024, DX4020, B420, and B426. Cellular option for the FPD-7024 part numbers B450 (Interface for Cellular Card) B440, B441, B442, B443, and B444.

Part mumbers D9068, D9052, D8024, D9024, D40024, D10024A, D7033, FMR-DACT-KEYPAD

Part numbers D2071A, DS9471, 911A, 911AC, D2071AC, D2071AHC, D2071ACPL-1, D2071ACT, D2071AH

One of the following programming keypads (FMR-DACT-KEYPAD, D7033, or DS9447) displays "SYSTEM FAULT" when programming one of  the following DACT models: D9068, DS9602, DCT-1, DCT-1E or FPT-DACT.

Part numbers D2071A, DS9471, 911A, 911AC, D2071AC, D2071AHC, D2071ACPL-1, D2071ACT, D2071AH