Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Access Control

    Sort by:
    ‎07-02-2020 04:40 PM
    How to set up Dual Factor Authentication (Card + Pin) APE
    View full article
    ‎03-31-2020 10:10 PM
    1. Open “Card personalization Configuration”. You can find this software by accessing the “Access Professional Edition” folder in the start menu. See figure 1. If unable to find in the start menu, this is located in the folder “C:\BOSCH\Access Professional Edition\CP\bin\SfmCfgApp.exe”, (unless non-default paths and folder names are chosen during installation). See figure 2.   Figure 1 Figure 2 *Note: Make sure to run the software with administrator rights.   2. In Card personalization Configuration go to the Print tab.   Figure 3   3. Create a print channel. Type the print channel desired name and click the button to the left.   Figure 4 Once the print channel is created, the installed printers at this PC will populate below.     Figure 6   4. The printer’s information will auto fill under the current channel, modify parameters as needed.   Figure 7   5. Once finished, click apply and close.   Figure 8   6. Restart the computer.
    View full article
    ‎06-13-2018 02:30 PM
    Article describes how to address devices on a LNL-8000
    View full article
    100% helpful (1/1)
    ‎05-21-2018 08:00 PM
    This article explains how to use the tamper functionality of an AMC in BIS?
    View full article
    ‎06-14-2018 02:25 PM
    Article describes whether barcodes can be used in rdkypro
    View full article
    ‎06-07-2018 10:19 PM
    Article describes how to configure AEC 1.0 "standard" 26 bit format
    View full article
    ‎06-05-2018 10:14 PM
    Possible solution to getting AEC "permission denied" error
    View full article
    ‎05-24-2018 04:34 PM
    Changing the Essex D8229 site code.
    View full article
    ‎05-16-2018 05:58 PM
    ReadykeyPRO is changing some cardholder badges to Lost / Inactive / Returned status. What could be causing this?
    View full article
    ‎06-13-2018 01:55 PM
    Article gives possible reason for "door already in use" AEC error message.
    View full article
    ‎06-13-2018 01:51 PM
    Article describes what a specific AEC sound means
    View full article
    ‎06-07-2018 05:06 PM
    Article lists compatible credentials for Lectus readers.
    View full article
    ‎06-01-2018 05:50 PM
    Describes reasons for facility code error in AEC
    View full article
    ‎03-31-2021 09:57 PM
    Scenario User needs to keep a door open Monday – Friday from 8 am to 5 pm.   Solution Create a time model (schedule), and then configure the door to open in that schedule.   1. Create a day model. Go to “System Data” and then “Calendar” Figure 1. Click on “Day Models” Figure 2. Click the “Create new” button Assign a name to the Day Model. Add a description and fill the intervals as needed In this example we are only creating one interval from 8 am to 5 pm. If needed, up to three intervals can be created in the same Day Model Click Save Figure 3. 2. Create a Time Model. Click “Time Models” Click the “Create new” button Assign a name to the Time Model. Add a description Select the number of days in the Period Select a reference date (select a past date and not a future date). Figure 4. Assign the Day Model to each day of the period as needed and click save Figure 5. Note: to verify the Time model is correct, click the preview button and confirm the dates match. The predefined holidays are shown below, assign the desired Day Model to apply on those days If holidays are not needed, click the “ignore special days” checkbox Figure 6. 3. Configure the door to open depending on time model Go back to main menu and go to “Configuration” Click “Device Data” Figure 7. In the DevEdit, find the desired door. Figure 8. Click the “Options” tab and click under “Unlock door” Figure 9. Select the desired option, in this example we choose “Door is open depending on time model” Figure 10. Select the desired “Time model” Click the “Save” button. Figure 11.  
    View full article
    ‎05-16-2018 04:35 PM
    This article will provide the workflow for adding an additional reader board to the primary RS-485 bus of an Access Easy Controller system.
    View full article
    ‎06-06-2018 01:49 PM
    Article describes how to configure door holiday schedules.
    View full article
    ‎05-22-2018 11:39 AM
      Difference between the two different types of iClass keypad readers
    View full article
    ‎05-22-2018 11:36 AM
      Related ProductsReadykey Pro Question How can I ensure that clients do not change certain features that require exclusive use of the SQL database for Readykey Pro? Answer Certain activities require that there are not any applications logged into the SQL database. These activities include running a database backup, archive, database setup, or forms designer. In some cases, a server has many clients logged into the database remotely. This makes it difficult to close all client connections. There is an easy way to work around this by running a few SQL commands. Login to SQL Management Studio Express. Expand the Databases folder and find AccessControl (for example, the Readykey Pro database). Right click on AccessControl and select New Query. In the query window, type: sp_who2 [Click EXECUTE]. Look for all SPID that have the login type of lenel. For each SPID number of login type lenel, type: kill (SPID) [Click EXECUTE]. IMPORTANT: Do not kill SPID for SQL Server, as this will kill the Management Studio connection. Run the required application (for example, Database Backup). This method does not prevent future connections to SQL Server. If an exclusive connection is required, the port SQL Server uses can be blocked by a firewall (for example, TCP port 1433). You should block ports with caution because it may also block local connections. A better solution would be to temporarily disable remote connections to SQL Server using SQL Server Configuration Manager.
    View full article
    ‎05-16-2018 04:37 PM
    How can I allow a cardholder to have more than one active badge in the system
    View full article
    ‎01-18-2021 06:18 AM
    AMS 3.0 How to configure Dual factor Authentication (Card + PIN)
    View full article
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist