Security: Access Control

What UL listings does the SC4000 have ? SC4000

Safecom SC2104 end of line (EOL) resistors needed for supervised points SC2104

What is the proper cable and placement for the antenna on the SafeCom radio ? SC4000, SC3100, SC2104

What is the part number for the wiring harness used on the Safecom SC2104E Radio SC2104

Safecom SC2104 radio set up  to operate with power from external source. SC2104

Unit has not communicated and the system status LED is blinking 1 red, pause, repeat. This would be an indicator of bad ROM check sum. SC3000

We are getting repeated dialer errors at the central station what could be the cause of this error ? SC4000, SC3100, SC2104, SC9000, RF200, D6690, D6695, D6200

What is the part number for the wiring harness used on the Safecom SC3100ME Radio SC3000

Part number for L-Bracket for whip antenna mount

We are getting a dialer error # 7 at the central station , what causes this error ? SC4000, SC3100, SC2104, SC9000, RF2000, D6690, D6695, D6200, ST-1000

The technician replaced a faulty SC4000 with a new SC4000. This was a one-for-one swap in the field. SC9000, SC3100, SC2104, SC4000, RF2000

What is a dialer error #6 and what are the possible causes ? SC4000, SC3100, SC2104, SC9000, D6690, D6695, D6200, ST-1000, RF2000  

Getting a dialer error # 1 what does this mean, and what causes it ? SC4000, SC3100, SC2104, D6690, D6695, D6200, ST-1000, SC900, RF2000

Getting a dialer error #2 at the central station.  What is this error and what causes it SC4000, SC3100, SC2104, D6690, RF2000, D6695, SC9000, ST-1000, D6200

We are getting a dialer error #3 at the central station, what causes the dialer error #3? SC4000, SC3100, SC2104, D6690, D6695, RF2000, SC9000, D6200, ST-1000

Central station is receiving a dialer error #4, what causes this error? SC4000, SC3100, SC2104, RF2000, D6690, D6695  

What is a dialer error #5 and what causes it ? SC4000, SC9000, SC3100, SC2104, D6690, D6695, ST-1000, D6200, RF2000

Unit has not communicated and the system status LED is blinking 1 red, pause, repeat. This would be an indicator of bad ROM check sum. SC2104  

SafeCom receiver generates an RF Trouble for a remote, but only when the Remote transmits an actual event to the SafeCom receiver. When events are no longer being transmitted and polls from the remote are received successfully, the RF Trouble restores until the next event is transmitted.  SC4000,SC2104,SC3000

What is  the part number for the powered wire harness for the SC2104 unit? SC2104