Security: Intrusion

How to program RF Points into 2000 Series control panels. D2212, D2412U, D2812

How to make Custom Text display after replacing the keypad. D2212, D2412, D2812,Custom Text, D223,D222, Remote Programming Software, D5200

Can the D220A Keypad be used with a D2112? How to determine which resistor to cut from the D220A Keypad to work with a D2112 panel. D220A (8 led),D2112,D2412,D2812,D2212.

How to prevent Users from Changing Codes on 2000 Series panels. Pressing 5 to change codes is available to Owners and Users. How can Users be prevented from changing codes? D2212,D2412,D2812

The to activate the A, B or C Key on a 2000 Series control panel.  D2212,D2412,D2812, A Key, B Key ,C Key, D223, D222, D5200

How to correct the D132A supervision point not showing normal circuit status.  Cannot get the onboard point from the D132A module to show normal circuit status. D132A,D4412,D6412,DS7220,DS7240,D2212

Part numbers D2112, D5200 RPS, RAMIV

Part numbers D2212, D2212B, D2212BE, D2412, D2412U, D2412UE, D2812, D2812U, D2812P, D222A, D223A, 

Overview Remote Program (Key 2) After pressing the [2] key and entering an Owner passcode to enter the Remote Program Mode, the display shows SYSTEM PROGRAM IN PROGRESS. If the [CLEAR] key is pressed to return to the OFF state, the system will not allow re-entering the Remote Program Mode for 30 seconds. Issue Remote Program (Key 2) and owners code will not work twice in a row. Solution D2212B Firmware Revision 3.03 After pressing the [2] key and entering an Owner passcode to enter the Remote Program Mode, the display shows SYSTEM PROGRAM IN PROGRESS. If the [CLEAR] key is pressed to return to the OFF state, the system will not allow re-entering the Remote Program Mode for 30 seconds.

How to  renew One Time Passcodes on 2000 series panels. D2212,D2412,D2812,D222A LCD,D223A LCD,D202A,D220A,D222,D223  

Part numbers D2212, D2212B, D2212BE, D2412, D2412U, D2412UE, D2812, D2812U D2812P, D168A

Part numbers D2212, D2212B, D2212BE, D2412, D2412U, D2412UE, D2812, D2812U, D2812P

Part numbers D5200, D2412

Issue If using the D220A on the D2112 do I have the Exit Feature? Solution No, the D2112 does not have the Exit Feature. It uses the "Step Out Feature". The Exit Feature does appear on page 23 of the Users Guide, but that is because this Keypad can also be used on other 2000 Series Panels which have the Exit Feature.

Part numbers D2212, D2212B, D2212BE, D2412, D2412U, D2412UE, D2812, D2812U D2812P

Issue What is the open air range on the 2 button and 4 button ITI keyfobs?   Solution   The 60-607-319.5 two button and the 60-606-319.5 four button ITI keyfobs are 500 feet open air transmitters.

How to prevent regular Users from Changing codes on 2000 series control panels. D2212, D2412, D2812, D2012, D2112, 2000 Series