Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    How to control Autodome IP 7000 from a DIVAR AN 5000 wired through a VJD 3000?

    Symptoms

    If you want to control the camera from a DIVAR wired through a VJD 3000, you have to configure the VJD and the DIVAR as well. Below you will find the steps which will help you to set up your devices.

    Diagnosis

    Autodome IP 7000 is not controllable from a DIVAR AN 5000 wired through a VJD 3000.

    Solution

    The wiring needs to be as follows:

    • DIVAR AN 5000 output RS-485- goes to terminal block TXD and RXD on the VJD 3000
    • DIVAR AN 5000 output RS-485+ goes to terminal block CTS on the VJD 3000

     

    A) Configuration of VJD 3000:

    For the VIDEOJET decoder 3000 configuration, there are 2 options.

     

    Option 1 - Configuration Manager

    1. Open Configuration Manager and connect to your decoder
    • Right click on the VIDEOJET > Select Set Session Authentication

    1.control Autodome IP 7000 from a DIVAR AN 5000 wired through a VJD 3000.png

    • Type the username and the password >  OK
     

    2.control Autodome IP 7000 from a DIVAR AN 5000 wired through a VJD 3000.png

    2     Select Serial Interface from Alarm tab and complete the fields with the following details:

    • Serial port function: Transparent
    • Baud rate: 9600
    • Data bits: 8
    • Stop bits: 1
    • Parity check: none
    • Interface Mode: RS-485

     

    3.control Autodome IP 7000 from a DIVAR AN 5000 wired through a VJD 3000.png

    3    Save your changes (ctrl + S) or:

    Click the Configuration Manager button > Save

     4.control Autodome IP 7000 from a DIVAR AN 5000 wired through a VJD 3000.png

    Option 2 - via Web page:

    1. Open the browser and type the IP Adress of the VJD 3000
    2. Go to Settings
    3. Select COM1 from Interfaces
    4. Complete the fields with the details above and click on the Set button

     

    5.control Autodome IP 7000 from a DIVAR AN 5000 wired through a VJD 3000.png

    B) Configuration of DIVAR AN 5000 PTZ controls:

    The details below must be filled in the DIVAR menu:

    • Main menu > Setting > Pan/Tilt/Zoom

    ο Channel #

    ο Protocol: Bosch

    ο Address: 1

    ο Baud Rate: 9600

    ο Data bits:8

    ο Stop Bits:1

    ο Parity:none

    ο Comm: RS-485

    Version history
    Revision #:
    1 of 1
    Last update:
    ‎09-23-2020 10:03 AM
    Updated by:
     
    Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist