Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    100% helpful (1/1)
    ‎12-10-2020 12:35 PM
    This guide is meant to help you adding new cameras in VRM in Configuration Client and display their images in Operator Client. Before adding a new camera there are a few things that need to be taken into consideration: You are not exceeding the maximum number of channels allowed. Each unit has a maximum number of channels. For example: DIP 5000 AIO the maximum number of channels is 42 DIP 6000/ 7000 AIO the maximum number of channels is 128 You have the neccesarry number of licenses installed on the system The units come with 8 channels pre-licensed. If you want to add more cameras or encoders/ decoders, you need first to make sure that licenses have been purchased. The system has enough storage to cover the retention time of the cameras. If there is no storage available,   there is a risk that your system will stop recording. The bandwidth available of the unit is not exceeded. For example: Bandwidth   DIP 5000 AIO: 170   Mbit/s Bandwidth   6000/ 7000 AIO: 550   Mbit/s Article requirements: Operator Client Configuration Client Camera PC/ Server/ Workstation
    View full article
    ‎12-10-2020 12:02 PM
    Depending on the license type you have installed in the Bosch Video Management System (BVMS), you can add a  certain number  and different types of cameras/ encoders.  BVMS s upports 3 rd  party cameras as well, but they need to be compliant to  ONVIF Profile S. This article explains how to add new ONVIF cameras to a system that runs in full Bosch Video Management System (BVMS) via the Configuration Client. We recommend using Bosch Workstations and Servers. They are fully tested and optimized for Bosch Video Management System. Article requirements: BVMS installed ONVIF camera PC/ Server/ Workstation
    View full article
    Top Contributors