When camera is set to auto track (by web interface) to "auto"-> IVA is detecting an object but camera is not following.
Auto tracking works and metadata is displayed only on a stored preposition.
There was a change introduced starting with FW v.7.70.
The new feature is: i-Track only starts on VCA-Alarm.
You can either program this on presets, e.g a detection field or if you want to have Itrack active regardless of its position, you need to activate "global VCA" and assign task detection area "whole screen"
now only activate iTrack "AUXON78" so the eye is in the corner, and your iTrack will always be on sharp
Note: IVA must be active for at least one preset scene in the VCA page on the Settings tab.
If IVA is configured for one scene, then all other scenes have Intelligent Tracking enabled by default. If a scene, however, has Motion+ or IVA 5.5 Flow activated, then Intelligent Tracker is disabled for these scenes.
Please refer also to the attached document.
In this article you can find the actions you need to do in order to solve the zoom speed for Autodome NDP-7512.
A customer could observe a difference in zoom speed in comparison to the previous generation. HDR was OFF by default in the 7000, But is ON by Default in the 7000i which has effect on the zoom speed. Therefore, disable HDR to obtain the zoom speeds that match the previous generation of the camera.