This article contains detailed technical description of Intrusion Detection, set up guidance for different usage scenarios and best practices. It is useful to get in depth knowledge about Intrusion detection or to find the answer of frequently asked questions.
Related Products: Video Analytics for Firmware 6.60 and above
This article covers traffic monitoring of Bosch Video Analytics with How to Videos (one already available and one in planning)
Default scenario of wrong way detection
Learn how to use the default scenario of wrong way detection: A predefined scenario that can be used to detect an object that is traveling the wrong way.
Default scenario traffic incidents
This predefined scenario is designed to detect common traffic incidents on roads:
Wrong way – triggers an alarm if object travels in wrong direction
Pedestrian – triggers an alarm if pedestrian is on the road
Slow vehicle – triggers an alarm if vehicle moves slower then predefined speed.
Stopped vehicle – triggers an alarm when vehicle is stopped longer than predefined time span.
Dropped object – Triggers and alarm if an object is dropped on the road
This how to video shows in detail how to use the predefined tasks Wrong way, Slow vehicle and Stopped vehicle.
Note: If needed you can get additional how to information on camera calibration.
The museum mode of Intelligent and Essential Video Analytics is an optimized tracking mode to detect whenever someone tries to reach towards and touch a valuable asset like a museum exhibit.
It can also be used in any other application where approaching a sterile zone from a more crowded environment shall be detected.
BVMS / MVS / VSDK
On request from development to provide a dump file from MVS system please follow the steps in the solution section.
Reproduce the issue
Download the Microsoft debugger procdump (https://technet.microsoft.com/en-us/sysinternals/dd996900.aspx). The procdump tool is also attaced to the article :How To create BVMS memory dump?
When application is crashing, do not click any buttons on the appeared error window that will change the program state.
Run the procdump.exe from the directory where you copied the tool with following command line (Start - cmd):
procdump.exe –ma <name of the programm exe> <dump file name>.dmp
In the case of MVS you need to do that for all 4 MVS services:
The attached documents should help you to make the upgrade process as smooth as possible. The upgrade itself is not restricted to BVMS software only. The supported software and firmware versions can be found in the release notes of the related BVMS version.
The BVMS Project Checklist is an Excel-based tool which makes it easier to design a BVMS system.
This article describes how to use the project checklist.
Pick the attachment you need, depending on the version of BVMS you have
This article describes how to configure a generic Microsoft Windows Server (2012 R2, 2016 or 2019) based server to serve as an iSCSI target for a Bosch video surveillance environment.
SCSI (Small Computer System Interface) is most commonly used for the communication between computers and peripheral devices, such as hard drives.
iSCSI enables devices to use SCSI over a network interface, therefore it makes a lot of sense for cameras to use iSCSI to record video.
The camera is a small computer that needs a (network) connection to a "hard drive" to store video footage. In other systems this job is performed by the network video recorder (NVR).
In order to use the software modules, the software needs to be licensed and to receive licenses for the software, the keys need to be registered online.
This article explains how to license a system that runs in full Bosch Video Management System (BVMS) mode with help of Security Systems Software License Manager tool (SLMS).