Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    ‎11-18-2021 09:47 AM
    This article explains how you can change the IP Matrix Passcode PIN when using Configuration Manager version lower than 7.50 & VIDEOJET decoder 7000 (VJD-7513) FW version lower than 10.22.
    View full article
    ‎07-02-2021 10:31 PM
    There are two methods of working with 3 rd   party apps: through Remote Portal and Configuration Manager. The methods using the Configuration Manager can be used both with an online system (cameras connected to the internet) and an   offline system   (no internet connection to local system). Once apps are installed on the camera, the configuration interface for each app can be accessed through the Local App Management Console on the camera. No internet connection required.   In this article you will find the step-by-step guide where is described the method using Configuration Manager.
    View full article
    ‎10-26-2021 12:19 PM
    By checking the Zoom threshold box you will select the current zoom position at which the mask will appear as the camera zooms in or be hidden as the camera zooms out.
    View full article
    ‎11-21-2022 01:41 PM
    Before you can operate your VIDEOJET decoder 7000/ 8000 within your network, it must have a valid  IP address  for your  network and a compatible subnet mask. This articles explains how you can change the IP Address of VIDEOJET decoder 7000/ 8000 using Configuration Manager.
    View full article
    ‎11-17-2022 12:13 PM
    When login Remote Portal in Configuration Manager v7.20.0067, the following error message is displayed "The remote name could not be resolved:"
    View full article
    ‎04-29-2021 09:06 AM
    The   Clear   button on the   Configuration Manager   is designed to clear the codes that are self-generated by the IP firmware or the Configuration Manager itself. Follow the steps below, if you want the "Clear" button from Configuration Manager to able to erase the Alarm task script that are self created by users themselves.   Step-by-step guide   When you create your alarm task script, add it within an opening quotes which then the   Clear   button will be able to erase all those codes within the quotes. Alternatively, create your own quotes within your script by following the below rules. In the  Below example,   //{{MyScript_start   is inserted before any script and   //}}Myscript_end   is inserted at the end of the script. By doing this, the   Clear   button will now be able to recognize and detect the manual scripts created by user and erase them.   Example: //{{Myscript_start ControlCode auxon1:={Operation(AuxOn)Number(1)}; if(Motion(1))then auxon1; //r1_o1 //}}Myscript_end
    View full article
    ‎06-16-2022 09:51 AM
    This article provides a step by step description of how to create certificates and configure  their distribution in the large systems. 
    View full article
    ‎08-25-2022 10:29 AM
    "Project Assistant easily cut our camera installation labor by 30%"
    View full article
    ‎06-16-2022 03:16 PM
    Find out from this article if there are restrictions of VRM Configuration utility pre-installed on DLA
    View full article
    Top Contributors