Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    a week ago
    Symptoms Connectivity problems after DIVAR Mobile Viewer APP upgrade from v3.0.0 to the new v3.1.0 Diagnosis As result of a software bug in the APP problems in the connectivity  can occur in case the DIVAR hybrid/network is running firmware v3.0.0 or below. Running firmware v3.1.0 does not show the problem. This problem exists for both Android and IOS app platfoms Solution Customers can upgrade the DIVAR firmware to v3.1.0, this will resolve the DIVAR Mobile Viewer v3.1.0 app connectivity problems. An improved DIVAR Mobile Viewer app is planned to be published on short notice. This will make the app compatible with both DIVAR hybrid/network firmware v3.0.0 and firmware v3.1.0
    View full article
    ‎07-22-2019 01:46 PM
    This article shows how to configure Input Alarm and later search for them in the Event search using Web Interface. There are only 3 different search parameters for Event type search, which are "All", "Motion" and "Alarm". Once can search for any alarms during the set time period and channel and in this way indirectly to filter for Input Alarm (if only Input Alarm triggers Recording for a particular channel). It is not possible to directly narrow the search for particular Alarm type (ex. Input alarm). 1.Configure the Input Alarm. Go to: Settings - Alarm - Input Alarm. Click Enable and Chose the respective Input (from 1 to 16), then click Record Channel and Save.  Note: The other Settings like Buzzer, Display Mon. A can also be configured but is not a must for performing Even Search. Schedule the recording. Settings - Schedule: Chose the days of the week, the time and enable "Alarm" Set the recoding stream. Settings - Storage - Recording: Chose the stream to be recorded. 2. Event Search - Chose the respective Camera (that recorded on Alarm Input) and search for "Alarm"
    View full article
    ‎05-16-2018 09:34 AM
    After changing the resolution of monitor to UHD (3840*2160), the attached monitors results always black.
    View full article
    Top Contributors