Security: Video

This article contains some hints about what to do when the FLEXIDOME IP 3000i IR does not provide Analog stream or it provides a grey image

This article describes what shoud be done to achieve an Optical Zoom for FLEXIDOME IP 3000i IR camera.

This is happening across several platforms and is happening in CM not on the Web. The behavior was observed on CM 7.50.0073

The maximum resolution of 5.3 MP can only be achieved with H.264 encoding

If you are using the ATSL-script, use the following RCP-CGI command to switch ON-OFF the IR-LED of FLEXIDOME IP 3000i IR camera

According to its Data Sheet, the Flexidome IP 3000i IR camera has 2 options to activate the alarm input. Please refer to the diagram from this article if you would like to get alarm input from some physical sensors.