Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 
    Sort by:
    ‎01-16-2024 09:42 AM
    This is a comprehensive reference for diagnosing and resolving common issues with Infrared illuminators in security systems.
    View full article
    ‎05-21-2024 07:38 AM
    Unsupported camera model: Auto-calibration is currently not supported for this camera model. Calibration could produce wrong results or might not work. Why is this message displayed in Configuration Manager?
    View full article
    ‎01-11-2024 10:06 AM
    “Error: Discontinuity in network stream!” appears randomly on the monitor/s connected to the VIDEOJET Decoder 7000 (7513). What could be the likely cause of this?
    View full article
    ‎01-03-2024 10:59 AM
    Select the resolution of the JPEG images. You can choose between various <formats>: – 720P: 1280×720 pixels (only available for HD cameras). – 1080P: 1920×1080 pixels (only available for HD cameras).
    View full article
    ‎01-03-2024 10:49 AM
    The way to get Metadata in Milestone is through the Bosch Enhanced Metadata Plug-in
    View full article
    ‎12-19-2023 10:57 AM
    During the authentication process with Bosch cameras to a RADIUS server, the event “5400 Authentication failed” occurs. Find out from this article what you can do in this case.
    View full article
    ‎11-29-2023 01:43 PM
    The configured camera TCP port is used from the BVMS Operator Client to the camera. This port is used by the BVMS Operator Client as a destination port. The source port is dynamic and therefore, it cannot be adjusted.
    View full article
    ‎11-28-2023 03:52 PM
    Hash Tag "#" is one of the few special characters, which is accepted by the camera, but it cannot be accepted on BVMS side (in order to connect to the camera) — due to the limitations of communication specifics some BVMS components are using. And as a result, communication might not work properly and "No connection" warning message in Operator Client image pane and black screen might occur
    View full article
    ‎05-31-2024 03:34 PM
    Starting with firmware 6.51.0026, clearing passwords was changed to only reset service user level password.
    View full article
    ‎10-26-2021 10:10 AM
    The method from this article shows you how to generate an updated certificate for Bosch IP Camera's and VRM Servers
    View full article
    ‎11-10-2023 09:30 AM
    The audio file can be played using the RCP+ command CONF_AUDIO_OUTPUT (0x09b9), payload=4 (Sample), which can of course also be sent to the device itself using ATSL scripting.
    View full article
    ‎10-31-2023 01:49 PM
    Does your camera show you the live view as in the image below? During day time (Color-Mode), the image is good, but as soon Night-Mode kicks-in and the IR-LED's turn on, the reflection is noticed.
    View full article
    ‎10-25-2023 08:20 AM
    The detection distance (based on the pre-defined requirements*) depends on the focal length and the size of the of the gun. 
    View full article
    ‎10-13-2023 08:41 AM
    This article provides solution for Bosch PTZ camera & Genetec VMS when camera's image does not follow the correct field of view on the map.
    View full article
    ‎10-04-2023 08:26 AM
    To set up certificate-based authentication with Bosch, you'll typically need to follow the steps from this article.
    View full article
    ‎12-21-2023 10:16 AM
    Bosch will undertake a cybersecurity best practice by disabling certain ports on the camera by default. This best practice is being undertaken to reduce potential attack surfaces and limit the exposure of sensitive services, as mentioned in our Data Security Guidebook since years.
    View full article
    ‎08-18-2023 10:21 AM
    This web page is for information only, so none of the fields displayed can be edited. Although this information is also included in the Log files, this view provides some valuable information at a quick glance.
    View full article
    ‎08-18-2023 10:11 AM
    Find out from this article what to do if the System Overview of Bosch camera shows the I/O controller FW version as zeros
    View full article
    ‎08-18-2023 10:03 AM
    Find out from this article what to do if the System Overview of Bosch camera shows the IR controller FW version as zeros
    View full article
    ‎08-18-2023 09:59 AM
    Find out from this article what to do if the System Overview of Bosch camera shows the Motor controller FW version as zeros
    View full article
    Top Contributors