Security: Video

The thermal mode is saved in the preposition settings. If you have changed the thermal mode of the camera in the Picture Settings Thermal page and you also want the Thermal color mode to apply to the existing saved pre-position, you have to re-save the pre-position again.  

This article explains if is it possible for DINION IP Thermal 8000 camera to measure the exact temperatures or not.

Should the inverter produce a sine/sinusoidal wave, a square wave or other?

"Show VCA items" is a function which works in Internet Explorer 11 with the Bosch MPEG ActiveX installed. Due the end-of-life of Internet Explorer, this function is no longer available on Microsoft Edge.

ONVIF control of the thermal DZ was never planned for the MIC-9000i in the launch of the product. However, you can get the Pan and Tilt via ONVIF Device Manager to work by enabling the PTZ configuration of the stream. 

Privacy masking is used to block a specific area of a scene from being viewed. Eight privacy mask areas can be defined.