DIVAR network 5000 / DIVAR hybrid 5000 support configuration of 3rd party cameras through the ONVIF Profile S protocol.
Let's suppose that y ou have ONVIF cameras connected to a DIVAR network 5000 / DIVAR hybrid 5000 on your site and you are using Bosch Video Management System (BVMS) Viewer.
Can BVMS Viewer monitor those cameras at the same time?
This guide is meant to help you adding new cameras in VRM in Configuration Client and display their images in Operator Client.
Before adding a new camera there are a few things that need to be taken into consideration:
You are not exceeding the maximum number of channels allowed. Each unit has a maximum number of channels. For example:
DIP 5000 AIO the maximum number of channels is 42
DIP 6000/ 7000 AIO the maximum number of channels is 128
You have the neccesarry number of licenses installed on the system
The units come with 8 channels pre-licensed. If you want to add more cameras or encoders/ decoders, you need first to make sure that licenses have been purchased.
The system has enough storage to cover the retention time of the cameras. If there is no storage available, there is a risk that your system will stop recording.
The bandwidth available of the unit is not exceeded. For example:
Bandwidth DIP 5000 AIO: 170 Mbit/s
Bandwidth 6000/ 7000 AIO: 550 Mbit/s
PC/ Server/ Workstation
Operator Client helps you display the original full image circle of a panoramic camera, its image dewarped or you can select a point of interest of the image. Cropping and using ePTZ in a cropped image is possible in Live and Playback Mode. The Image window allows a flexible resizing of the Image pane that displays a panoramic camera or any other camera.
This article provides you information on how you can switch the view mode of panoramic camera in Operator Client.
PC/ Server/ Workstation
If one of DIVARs IP 5000 AIO is selected on a user profile, the Operator Client opens the site and works fine. One message is displayed when two or more DIVARs are added into the same Enterprise system.
If you already have a DIP 5000 AIO into your Enterprise system and you want to add additional units but you receive the following message, you can solve this by using the steps below:
"Server of configuration database is already in the server list. Remove either the server that is twice in the list or make sure that the configuration database is not cloned between servers."