Security: Video

This article explains step-by-step how to add and keep the purchased licenses in my Remote Portal account. Upon purchasing licensing, an email from Bosch provides the needed codes.

Health monitoring with Remote System Management is very easy, as in one page you have an overview of the state of all DIVAR IPs connected to your Remote Portal and then, drilling down a level, you have an instant overview of the state of the cameras connected to the selected DIVAR IP. A service is available to setup health alerts for devices via email, so you are informed when any emergencies pop up.

Please configure the same time zone on the PC, download the Remote Portal activation file again and then you will be able to load it into Config Client and license the system.

This article presents the comprehensive steps of DIVAR-IP all-in-one System Manager and Remote System Management installation and configuration

Check this article and see how to solve if the cameras in Alarm Management cannot use services activated in Remote Portal. 

This article provides a solution regarding why the systems aren't showing up on the dashboard in my Remote Portal account.

If the CPP6, 7 and 7.3 cameras no longer have a live image or there is a delay in the image, and the Internet connection has been tested and is within normal parameters, it would be good to check if the cameras have the latest current firmware version 7.86.0020. This firmware version solves a 100% CPU load issue for CPP6, 7, 7.3 from firmware 7.82 to 7.86.19

Bosch Alarm Management allows event-based and continuous cloud recording of connected cameras.

When smoke or fire is been detected, AVIOTEC will sent a Smoke/Fire event to the Alarm Management and at the same time trigger it’s output.  Using this output status, we are able to trigger the Alarm Management.

License expansions missing after upgrade to BVMS 11 in Remote Portal. Only 1 x MBV-XCHANPLU license activated instead of 16 x MBV-XCHANPLU. What to do?

Follow the steps from this article and find out how you can license BVMS Viewer v.11.0  or above for free.

This article describes how you can upgrade a BVMS license to a higher version via Bosch Remote Portal. ( eg. from BVMS 11.0  to BVMS 11.1.x )

This article describes how can you check the status of your SMA for BVMS version≥11.x via Remote Portal.

This FAQ article contains a lot of questions and answers related to Bosch Remote System Management service 

"Remote Portal is not reachable. Please check your network settings, maybe no valid gateway and DNS is configured" Follow the steps from this article and find out how you can register and connect your camera to the Bosch Remote Portal.

Let's see how can you generate the sensor report of you Fire Panel from Bosch Remote Portal!

This article provides you with the available options, services and licenses in Bosch Remote Portal for Bosch IP cameras.

This article contains the step-by-step guide related to the MP4 Video Export from Video Security Client to your PC (Windows) in a local directory. In this article, the Video Security Client is connected to the Remote Portal and explains how you can export video from cameras connected to your RP account.

Video Security Client is the market’s easy to use video surveillance application provided by Bosch for local and remote monitoring of IP cameras and appliances. The software supports small systems from 1 to 128 sites with up to 256 cameras each. Also, you can use Video Security Client being connected to your Remote Portal account. Follow this article and find out the limitations and how can you connect your Remote Portal account to Video Security Client.

This article shows from where can I find my Bosch Remote Portal ID.