The attached technical notes give a short introduction to scripting alarm and counter tasks with Intelligent and Essential Video Analytics in FW 7.60. It also provides a broad selection of example scripts for explanation as well as including real world application examples.
Never lose track of an object of interest! Intelligent Tracking automatically zooms in to and follows a selected Intelligent Video Analytics object as far as possible with the camera. For AUTODOME / MIC IP 7000, this means automatically steering the camera to zoom in to the object and follow it. For a FLEXIDOME IP panoramic 7000, Intelligent Tracking is available in the Virtual PTZ video and steers the dewarped cut-out. For DINION / FLEXIDOME IP 7000 / 8000 cameras, Intelligent Tracking can steer a region of interest (ROI) stream. The technical note in the attachment discribes how to set Intelligent Tracking up with FW 6.30 and lists the differences based on the camera types.
Object classification takes an object detected and tracked by either Essential or Intelligent Video Analytics, evaluates its geometric and speed properties, and decides whether the object is an upright person, a bike, a car or a truck. The technical note in the attachment provides an overview of object classification, describes how to configure it with FW 6.30, and what the limitations are.
The museum mode of Intelligent and Essential Video Analytics is an optimized tracking mode to detect whenever someone tries to reach towards and touch a valuable asset like a museum exhibit. It can also be used in any other application where approaching a sterile zone from a more crowded environment shall be detected. The attached tech note describes when and how to use it with FW 6.30.
There are several Video Content Analysis (VCA) algorithms available in Bosch IP cameras: Tamper Detection, MOTION+, Essential Video Analytics, Intelligent Video Analytics and Intelligent Tracking. To receive alarm events from them and visualize the results, a client is needed. Each client can choose to present only a part of information and in a different way. The attached technical note gives a high-level overview of the clients supplied by Bosch and the different integration possibilities into 3rd party systems available today.
Further information concerning integration into 3rd party software can be found at the Integration Partner Program (IPP) webpage.
The tech note in the attachment describes how to set up map displays of objects detected and tracked by Intelligent Video Analytics, Essential Video Analytics or Intelligent Tracking with FW 6.4x and Video Security Client 2.1.