Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    ‎07-02-2021 04:23 PM
    The purpose of this article is to help you disabling the compass character from the Screen Display (OSD) of the PTZ camera via its web interface . This example was troubleshooted on one AUTODOME dynamic 7000 HD camera with FW version 7.10.0076
    View full article
    ‎06-29-2021 07:01 PM
    In some cases the IVA tasks can get lost after firmware update. There are 2 ways. In both ways it's not guaranteed that all task shall work afterwards since new firmware version can contain a new IVA version with new features. So please double check afterwards. It shall at-least save some time instead of starting from scratch.
    View full article
    ‎06-29-2021 06:47 PM
    One of the possible traps  that DIVAR IP hybrid/network can send is   HDD_STATUS_CHANGE. The HDD_STATUS_CHANGE is triggered when the status of the Hard Disk changes. 
    View full article
    ‎06-25-2021 08:43 AM
    NetApp SANtricity Dynamic Disk Pools (DDP)  technology represents a significant advancement in storage system, data protection and data management. As disk capacities continue to grow without sufficient increases in data transfer rates, traditional RAID rebuild times are getting longer, even up to several days. This slow rebuild results in much more time with degraded performance and exposure to additional disk failures.
    View full article
    ‎06-25-2021 08:42 AM
    *Firmware 9.10 must be installed prior to installation of this firmware 9.51. Firmware download location: Download Store or on the product page > Downloads: VIDEOJET decoder 8000 page
    View full article
    ‎10-26-2021 12:19 PM
    By checking the Zoom threshold box you will select the current zoom position at which the mask will appear as the camera zooms in or be hidden as the camera zooms out.
    View full article
    ‎10-26-2021 11:22 AM
    When dealing with 3rd party or VSG, it’s recommended to get at-least "1" I-frame every second (normal scene).
    View full article
    ‎06-21-2021 11:06 AM
    Logs   are definitely important. We would even say they are the most important thing for a   system to function properly. At some point, the Central Support Team may ask you to provide them with the log files of your system. The steps below can be used for the following models: DIVAR AN 3000/5000 , DIVAR Hybrid 3000/5000, DIVAR Network 2000/3000/5000 You can collect Service logs from the unit using two methods. Both methods will save the service logs as a password protected ZIP file ( Example: ServiceLog-20141204T172254.zip ). Method 1 : from Local User Interface Method 2 : remote, using a browser
    View full article
    Thursday
    The default SMTP port number for Bosch IP cameras is 25. The required SMTP port can differ depending on the service provider. From FW 5.80.0073 onwards it is possible to change the SMTP port using Alarm Task Script Language (ATSL).
    View full article
    ‎06-18-2021 05:55 PM
    The privacy mask moves around with the image when the MIC IP starlight 7000 HD camera is in PTZ mode. The camera is integrated into a 3rd party Software.
    View full article
    ‎06-18-2021 04:12 PM
    Before you can operate your VIDEOJET decoder 7000/ 8000 within your network, it must have a valid  IP address  for your  network and a compatible subnet mask. This articles explains how you can change the IP Address of VIDEOJET decoder 7000/ 8000 using Configuration Manager.
    View full article
    ‎10-26-2021 11:16 AM
    This article explains you how and where you can get the logs of your camera. The system logs are extremely useful for troubleshooting recurring or obscure problems, as they provide a record of all work performed on the system and may shed light on hard-to-spot interactions between seemingly unrelated symptoms.  
    View full article
    ‎06-18-2021 03:36 PM
    When  login Remote Portal in Configuration Manager v7.20.0067, the following error message is displayed "The remote name could not be resolved: api.remote.boschsecurity.com" Solution
    View full article
    ‎11-09-2021 04:58 PM
    The 95 W midspan is a high-power PoH (Power Over HDBase T) device that provides data and power between an Ethernet switch and an IP camera.
    View full article
    ‎06-10-2021 10:57 AM
    From this article you will find out how to set up the IP Matrix configuration on the VIDEOJET decoder 7000 (VJD-7513) using Configuration Manager.   The built-in IP Matrix functionality, together with a connected keyboard, allows VIDEOJET decoder 7000 to run as a stand-alone system. An operator can manage up to 32 cameras via the keyboard without any PC or management system required. System setup is quickly done with Configuration Manager. After that, no PC is required to run the IP Matrix   Note: According to the Release letter (Firmware 9.51) of VJD-7513, VIDEOJET decoder 7000 supports IP Matrix application as built-in feature. According to the Release letter (Firmware 54.8.02) of VJD-7000, IP matrix remote monitor is only possible with UDP. TCP not supported. ** VJD-7000 can be used as an extended monitor to IP Matrix in single and quad view. Please check also the following article and find out: Which are the system requirements for configuration/ operation of VIDEOJET decoder 3000/ 7000/ 8000?   A single system can support: 2 physical monitor displays One KBD-Universal XF keyboard 32 cameras 32 camera sequences 9 favorite views
    View full article
    ‎06-10-2021 09:43 AM
    Perhaps you are wondering how to set the maximum retention time on a Divar Network? Some of our customers asked about this option. Well, in DIVAR Network and Hybrid there is not retention time. But you can set the automatically deleting time, that is more or less the same.   Step-by-step guide:   Open one Browser and type your device IP address Login with the administrator account Go to Settings > Storage > Recording Fill in the box with the desired automatic deletion time   Another option is to make this change directly in the local interface of the unit.
    View full article
    ‎06-10-2021 09:32 AM
    Short intro and related topics: This article will review the settings required to configure Windows as a NTP time server. Note: If you are running VRM and have the Time Server enabled, you must disable the Time Server before performing the following. Article requirements: Windows Server 2016/ Windows 10
    View full article
    ‎06-10-2021 09:14 AM
    Find below Gmail SMTP settings which you have to set in your EMAIL screen of DIVAR Menu. SMTP Server address: smtp.gmail.com Username: Your Gmail e-mail adress Password: Your Gmail password Port (TLS 😞 587 Port (SSL 😞 465 TLS / SSL required: Yes TLS : Transport Layer Security         SSL: Secure Sockets Layer What happens if you do not select either one? If neither SSL nor TLS is used , then the communication line can easily become a party line for eavesdroppers, all data transmitted between DIVAR and e-mail account for anyone to see.
    View full article
    ‎12-17-2021 11:39 AM
    Question   Which is the VSG preparation to support ONVIF Profile T in BVMS 10.0?   Answer   Additionally to ONVIF profile S, BVMS 10.0 supports ONVIF profile T. Profile S concentrates on basic video streaming and configuration Profile T focuses on advanced video streaming like use of H.264, H265 encoding formats, HTTPS streaming and event definition is more precise there Profile T functionality is only supported for devices that are added over VSG For conditional and optional features please refer to the BVMS - ONVIF Device compatibility article. Functionalities available for all devices added over VSG (BVMS 10.0): The ONVIF relays are scanned automatically Relays can be added to the Logical Tree by drag& drop and triggered from there Thee relay status is automatically updated and signaled with an appropriate icon in Operator Client Status and triggering is possible over BVMS scripts Once ONVIF camera is added to VSG, its capabilities are automatically scanned In the “Add ONVIF encoder” dialog it was added a new device properties entry that shows weather AUX is supported by device. The AUX commands are sent to camera vis VSG and can be triggered for an ONVIF device on alarm. Note: most of the ONVIF cameras do not support all in Configuration Client available events   ONVIF vendor mapping:   ONVIF camera connection to VSG and BVMS Operator Client: Live video from ONVIF camera to VSG or Operator Client can be secured with a Secure connection check box in the Add/ Edit ONVIF Encoder dialog. The secure connection is not chosen by default. (Default HTTPS port is 443) If the live video does not have to be secured, it is possible to choose what protocol should be used: TCP, UDP, Multicast, UDP Unicast. Note: The protocol automatically is switched to TCP if Secure connection is chosen:   Ports used between ONVIF camera and VSG: RTP/RTSP/TCP (secured 😞 443 HTTPS: 443/ customizable (requires TCP)   RTP/RTSP/TCP (unsecured 😞 80 HTTPS: 80/ customizable (requires TCP)   Unicast/ Multicast UDP: has to be configured in a camera first control connection via http port (default port 80 or customizable/ RTSP port: 554)   Nice to know: For a better understanding of the  BVMS 10.0 - ONVIF camera integration with VSG , we   encourage  you to join our online Trainings from  Bosch Building Technologies Academy!
    View full article
    ‎06-10-2021 12:29 AM
    It is possible to add ONVIF compliant cameras to Bosch Video Management System as live only devices or as VSG devices (then the cameras will also record). This article explains how to add an ONVIF camera as VSG device in full Bosch Video Management System (BVMS 10.1). We recommend using Bosch Workstations and Servers. They are fully tested and optimized for Bosch Video Management System.   Article requirements: BVMS installed ONVIF camera. Please refer to BVMS - ONVIF Device compatibility for additional information. PC/ Server/ Workstation
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist