Relates to: IP Storage/PC HW - DIVAR IP 6000 R2 and DIVAR IP 7000 R2
Both DIVAR IP units running the BIOS from American Megatrends Inc. (A.M.I)
There are PRE BOOT or POST BOOT beeps.
Please see the following Acoustic Error Codes.
In this article we cover the following basic questions:
How to Factory Default a NetApp E-Series unit by using BOSCH tools and NetApp WEB GUI?
How to download the NetApp Support Bundle of a reachable online NetApp Storage Array
The entire BVMS installation package, available on the downloadstore, contains the client as well as the server components. When a BVMS client needs to be deployed, all of this data (over 2.5GB) needs to be copied to the target workstation, which can be quite a challenge in some environments.
🛈 Port Forwarding
Allows remote computers (for example, computers on the Internet) to connect to a specific computer or service within a private local-area network (LAN).
In a typical residential network, nodes obtain Internet access through a DSL or cable modem connected to a router or network address translator (NAT/NAPT). Hosts on the private network are connected to an Ethernet switch or communicate via a wireless LAN. The NAT device's external interface is configured with a public IP address. The computers behind the router, on the other hand, are invisible to hosts on the Internet as they each communicate only with a private IP address.
When configuring port forwarding, the network administrator sets aside one port number on the gateway for the exclusive use of communicating with a service in the private network, located on a specific host. External hosts must know this port number and the address of the gateway to communicate with the network-internal service. Often, the port numbers of well-known Internet services, such as port number 80 for web services (HTTP), are used in port forwarding, so that common Internet services may be implemented on hosts within private networks.