Security: Video

Be sure that the MIC-7100i camera is configured in BVMS Configuration Client with "Bosch-AutoDome Bilinx" protocol and not with "Bosch-AutoDome" protocol or other options from the list.

Time zone drop down is greyed out and it's not possible to reconfigure the Time Zone on the DIP-44/64 after installing BVMS 12.1 and enabling UAC.

In this article you will find the ports which are used for Remote System Management

This article contains the list of Security Advisories (SA) to inform you about identified security vulnerabilities in our product or service and proposed solutions.

This Authorization Letter is applicable for all Bosch Security and Safety products & software when a password reset for them is requested by customers, system integrators or by a local sales representative.

If you forgot the service level password for you Bosch IP camera and you want to reset its password, the Central Support Team can help you.

Do you want to configure Video Content Analysis of your device and "VCA: Authorization required" message is displayed in Configuration Manager? Find out here why this message is displayed and what you should do to fix it.

Check this article to learn how to move a license from an user account to another one in Remote Portal

Yes, it is possible to do this setting (minimum TLS) to multiple cameras at once in Configuration Manager. You can do this change after you authenticate on those cameras. Learn more!

The Advanced Video View+ license doesn’t work at site level or per user basis and can be activated per camera.

Using the Internet Explorer 11, there is video from all 4 channels in configurator and event monitor, but audio from the camera is present only on channel 1. Since Internet Explorer 11 is EoL, this behavior will not be changed/ improved.

Please note that the relay output of the IO Alarm card is a dry contact relay (with 24VAC/VDC, 5 A). In order to control another circuit that has a 230V you can't do that directly because its higher than it was design for. In order to safety control a 230V, you could use a 24V on that output and control an additional/external relay: powering its coil this relay could switch the 230 circuit of the washer.

BVMS v11.0 offers a map-based tracking assistant and improved geographical awareness with online maps. Read on to learn how to configure the map-based tracking assistant.

This article explains how to add new ONVIF cameras to a system that runs in full Bosch Video Management System (BVMS) via the Configuration Client. Depending on the license type you have installed in the Bosch Video Management System (BVMS), you can add a certain number and different types of cameras/ encoders.  BVMS supports 3rd party cameras as well, but they need to be compliant to ONVIF Profile S.

BVMS Desktop screen (BVMS Kiosk screen) has several customization possibilities for introducing a company logo picture and a custom text, as well as selecting if an application icon will appear on the screen or not.  Follow this article to see the guidance on how to make these customizations.

This article describes how a Tattile camera can be connected to BVMS. We recommend keeping the Tattile camera documentation and BVMS configuration manual at hand to fine tune the system configuration to the specific needs of your project

In order to enhance user experience and security for all connected recording and management systems, Bosch has upgraded the cloud and service infrastructure. As a result, existing connections between DIVAR IP all-in-one systems and Remote Portal were terminated on February 15th 2024 and will need to be restored.

This article informs you about the way of working of the Central Technical Support when you contact them regarding your faulty  Bosch Security Systems device. 

Having trouble with your DSA unit and not sure which are the next steps? Then contact the Central Technical Support team and provide the following mandatory information: Contact Information - make sure your contact information is accurate and up to date. This includes your name, phone number, and email address. Description of the Issue - please describe the issue you are facing in as much detail as possible. Include any error messages, unusual behavior, or specific circumstances surrounding the problem. Product Information  - include the product name, model number The Serial Number Support Bundle File (to download it, please check one of these articles based on your product:  DSA E2700, DSA E2800 from SANtricity Storage Manager App and DSA E2800 via web interface) Registration Form Provide the segment code from the back of the unit if the unit is not responding (lockdown)           Please note that prior to any action, the Central Technical Support team will check whether the DSA unit is still in warranty or not.         1. If your unit is Out of Warranty: The unit will not be serviced by the Central Technical Support nor their IT partner You have the possibility to extend the warranty (with extra 2 years) If you agree to pursue this path, then Central Technical Support will redirect you to the responsible department, from where you will receive a price offer. Also, if the unit is not covered by warranty, Central Technical Support will provide support based on a good will and only as best effort.  Nice to know: It is best that warranty extensions are purchased before the unit's warranty expires as In-Warranty service extensions are cheaper than out of warranty service extensions. Spare parts are not available for both DSA E2700 series and E2800 series when the units are out of warranty, therefore the only option left is to purchase a service extension.           2. If your unit is under Warranty: the Central Technical Support team will open a support ticket with their IT partner   Please note that for any other issues or concerns, please do not hesitate to reach out the Central Technical Support team at any time.