How to terminate a M12 connector for FLEXIDOME micro 5000 MP?
Both RJ45 and M12 plug connectors are available with IEC 11801:2002 Cat5 compliance. This further simplifies the concurrent use of both connector types within a single system.
Assembly consists of three easy steps, none of which require specialist tools.
The plug connectors, compliant with all standards and fully shielded against EMC interference, are available in four-pin and eight-pin configurations. They can be connected to flexible or rigid wires, with sizes ranging from AWG 26 to AWG 22. This makes the connectors suitable for all Industrial Ethernet transmission systems, Ethernet-based fieldbus systems such as Profinet, and EtherNet/IP up to gigabit speeds.
The M12 Quickon connector provides a sturdy metal housing with a plug-and-turn mechanism.
A 360 degree shielding connection with an iris spring means the connector is well suited to system environments with large amounts of EMC interference.
The compact design of the RJ45 Quickon connector, on the other hand, makes it suitable for horizontal or vertical multi-port connection (as is frequently required by switches, for example).
Connector ID rings are available in eight colors to visually aid patch-bay layout.