Security: Video

If you have a DIVAR network/hybrid 2000/3000/5000 recorder and you want to connect and configure it, you can do it with the internet explorer compatibility mode in Microsoft Edge and you can use the system as before.

This article explains step by step how to remotely connect to DIVAR Network or Hybrid via Divar Mobile Viewer App

This Authorization Letter is applicable for all Bosch Security and Safety products & software when a password reset for them is requested by customers, system integrators or by a local sales representative.

You can collect Service logs from the unit using two methods. Both methods will save the service logs as a password protected ZIP file ( Example: ServiceLog-XXXXX.zip ).

Before requesting a password reset, please note that you need to provide some important information to the Central Technical Support Team to get help from them.

Remote Connect Lite service enables connection between Divar network/hybrid, cloud and client software.

The Axis cameras can be added to the DIVAR Hybrid system and the Live view can be seen for a moment, but when going back to the settings to see the cameras, they are no longer available and the live view is also paused. What to do?

If you have for example a DIVAR 7000 AIO as central BVMS server and also, on the same network, you have a DIVAR Network Video Recorder (NVR) to which cameras are connected to and recording, the recording is typically handled by the NVR itself. Therefore, in this case the cameras added on the NVR will continue recording only there because the NVR manages the recording and storage of video footage from them.

DIVAR 5000 network or Hybrid do not support KBD-UXF. However, the KBD-DIGITAL is still a current product and can be used.

The HDD compatibility list for DIVAR AN 3000 and DIVAR AN 5000 in the Operations Manual, page 166 or you can find it through this article. Have a look!

When you request to reset the DIVAR password, the Central Technical Support team provides you with the unlock codes. The unlock codes received from the CTS are valid only for 1 Day. Moreover, please make sure that the date displayed on the Live monitor matches the date you requested the password reset.

Note that the recordings are not removed instantly. The recordings will be deleted on the next day at 12:00 AM, after the automatic delete is changed.

One of the possible traps  that DIVAR IP hybrid/network can send is HDD_STATUS_CHANGE. The HDD_STATUS_CHANGE is triggered when the status of the Hard Disk changes. 

🛈 Port Forwarding Allows remote computers (for example, computers on the Internet) to connect to a specific computer or service within a private local-area network (LAN). In a typical residential network, nodes obtain Internet access through a DSL or cable modem connected to a router or network address translator (NAT/NAPT). Hosts on the private network are connected to an Ethernet switch or communicate via a wireless LAN. The NAT device's external interface is configured with a public IP address. The computers behind the router, on the other hand, are invisible to hosts on the Internet as they each communicate only with a private IP address. When configuring port forwarding, the network administrator sets aside one port number on the gateway for the exclusive use of communicating with a service in the private network, located on a specific host. External hosts must know this port number and the address of the gateway to communicate with the network-internal service. Often, the port numbers of well-known Internet services, such as port number 80 for web services (HTTP), are used in port forwarding, so that common Internet services may be implemented on hosts within private networks.

When you are using letters in German language like ü, ö, ä for setting the password, the DIVAR doesn't take them into consideration and you will not be able to access your DIVAR. Therefore, please avoid using German letters when setting a password on your DIVAR Analog 3000.  

This FAQ article explains whether it is possible to activate and use Alarm Out 1 or 2 via DIVAR Mobile Viewer App. One of the tests performed by Central Technical Support Team was on a DIVAR Hybrid 5000 with 6 outputs and they have used the latest firmware versions on DIVAR and cameras, so make sure you do the same.

If the administrator account (which was originally created when initial setup wizard was run) has been deleted locally and another new administrator account was created, then it is not possible to create user via web. Only locally is possible, as the application is still looking for the original admin account.

Before using the App please make sure that you have configured the Passwords, users and ports on your DIVAR and the same data is entered in the App.

This article shows how to configure Input Alarm and later search for them in the Event search using Web Interface.

The red x  indicates that the password of the camera is not set in your DIVAR and you will be not able to see the camera’s image.