Security: Video

This article provides a step-by-step guide on how to onboard a Bosch camera to Genetec Security Center SaaS using Direct-to-Cloud (D2C) connectivity.

This article explains how to set up a custom tour for Bosch cameras and finally making the custom tour accessible in the BVMS Operator Client.

Please note that this is not a bug, this behavior is as designed. Passwords are no longer stored in the config file. Therefore, a new password must be entered.

Intelligent Video Analytics (IVA) Pro provides application-specific packages for building security and operations (IVA Pro Buildings), perimeter security (IVA Pro Perimeter), and traffic monitoring (IVA Pro Traffic). While some of the IVA Pro variants are included by default on supported cameras, others can be added via licenses. This article is dedicated to describing the license process in full.

Different devices, whether cameras or encoders, offer a different amount of processing power for video content analysis (VCA).

This article present causes and solutions for device configuration not supported error and the site can’t be reached error after the camera’s IP address change.

This article gives an overview of CPPs that correspond to certain types of cameras, decoders and encoders.

For fast incident retrieval, the free Forensic Search Plug-in seamlessly integrates with Genetec Security Center and is fully compatible with all Bosch cameras. When the Bosch Forensic Search Plug-in is installed and configured, it can be used from Genetec Security Desk. 

After configuring the Virtual mask in the web browser of Bosch CPP7.3 camera and afterwards going back to the Live view, the Virtual mask appears as Privacy mask and is not transparent and other inappropriate behaviors have been noticed. This happens on the Bosch CPP7.3 cameras that have FW version older than v.7.86.0019

This article lists how to configure ANR feature in BVMS and how to set up correctly the iSCSI and direct replay. 

Please check which port and protocol have been set on the camera that has the live black image.

This article will guide you to setup a App password usage from your Google account which you can use the generated password for Bosch IP camera alarm email notification setup.

This article explains how to secure access and manage ports for Bosch IP video devices. General network port usage and video transmission: HTTP, HTTPS and video port usage: Video software and port selection: SSH tunneling

When the camera operates in automatic Night-Mode and the switching interval is too fast the camera built in protection mechanism will intervene to prevent premature wear of the mechanical IR-Cut filter.

This article provides you with the available options, services and licenses in Bosch Remote Portal for Bosch IP cameras.

Starting from Firmware v8.80.0090, the file for all CPP14 sub-platforms are now unified into a single file.

The "User Manual Bosch AI Alarm Verification Plugin for Milestone XProtect" is a comprehensive guide designed to assist users in integrating and utilizing the Bosch AI Alarm Verification Plugin with the Milestone XProtect video management system.

The default SMTP port number for Bosch IP cameras is 25. The required SMTP port can differ depending on the service provider. From FW 5.80.0073 onwards it is possible to change the SMTP port using Alarm Task Script Language (ATSL).

In this article, you will find such an automation process between Bosch Cameras and Advantech Adam I/O devices.

With fw7.70 a new feature was introduced that allows you to tune the scene for Day and Night separately using 2 custom scene modes. This article explains how to switch the scene modes Custom mode#1 & Custom mode#2 based on Day or Night for Bosch cameras