How to Bypass a Point on D7000/D9000/G & New G Series Panels

[#1]

Issue

What is the process for bypassing a point on a D7000/D9000/G & New G Series control panel?

Solution

1. Enter [COMMAND] [0] or press [ESC], then press [NEXT] until the display reads BYPASS A POINT?, then press [ENT].
2. If prompted to enter a passcode, enter a valid passcode with authority to bypass a point in the associated area, then press [ENT].
3. Enter the point number and press [ENT], or press [NEXT] until the correct point displays.
4. Press [ENT] to bypass the selected point.

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, B9512G, B8512G