Note: The Master - Slave application is used to save on popit addresses for a large systems. You can use one popit address for a long hall or one large room that would otherwise require several addresses to cover it.
1. The F220-B6PM is a 24 VDC 4-Wire Master Popited Base that supervises up to nineteen F220-B6 Two-Wire Slave Bases. The two-wire slave detectors then report as the master base address.
2. The F220-B6PS 4-Wire Popited Base operates on 12 or 24VDC that does not support 2-Wire Slave bases.
3. The F220-B6PS, F220-B6, and the F220-B6PM bases can use any of the following smoke or heat heads.
F220-P - Photoelectric Smoke Detector
F220-PTH - Photoelectric Smoke Detector with 135F/57C Heat Sensor
F220-PTHC - Photoelectric Smoke Detector with 135F/57C Heat and Carbon Monoxide Sensors
F220-135 - Electronic Rate of Rise/Fixed Temperature 135F/57C Heat Detector
F220-135F - Electronic Fixed Temperature 135F/57C Heat Detector
F220-190F - Electronic Fixed Temperature 190F/88C Heat Detector