How to Diagnose Not Programmed See Instll Guide D9068 DACT Family

[#1]

Issue

D7033 Keypad displays, "NOT PROGRAMMED, SEE INSTALL GUIDE" when connected to a D9068 DACT Dialer.

Solution

1. Make sure that the keypad is addressed to 1
2. Make sure that both ground wires are attached to the keypad under the "B" terminal
3. Part number for the harness used with the D7033 or the DS9447 keypad:  45777C.

Part Numbers D9068, DS9602, DCT-1, DCT-1E, FPT-DACT, DS9447, D7033, FMR-DACT-KEYPAD