How to Troubleshoot a D327A Install on Morley FACP

[#1]

Issue

The keypad is displaying no reply after the D327A has been installed, and an auto learn has been completed at the panel.

Solution

A 24vdc loop has not been applied to the input of this module before it was learned in.

1.   Run 24vdc to the input and data to each D327A in the field.
2.  Go into the commission mode, and select the loop that the D327A is installed on.
3. Select (3) Auto Learn
4. Press the "Yes" Key.

Part numbers D10024A, D10024, D9024, D8024, D327A