Issue
Can fire points be connected to the D8128D Octo-Popit when used with a D9412G panel?
Solution
Yes, The D8128D OctoPOPIT Module is UL Listed for Local or Police Connected Burglary Alarm, Central Station Burglary Alarm, Household Burglary Alarm applications, and commercial fire applications (UL 864 and NFPA 72). The D8128D is also suitable for fire supervisory applications, such as indicating circuit supervision (using the D192C/D192G Bell Circuit Supervision Module), sprinkler supervision, and valve tamper protection. Requirements for Fire Initiation Applications Non-powered, fire initiating devices such as pull-stations, heat detectors, and UL Listed four-wire smoke detectors can be connected directly to the point inputs on the D8128D. The D125B Dual Powered Loop Interface Module or the D129 Dual Class “A” Module zone outputs can be connected directly to the point inputs on the D8128D. Use the D125B to connect two-wire smoke detectors. Typically, the D129 is used for connecting water flow switches. The D125B or D129 and the OctoPOPIT can be mounted in the same enclosure with the panel or in a separate enclosure connected to the panel’s enclosure by conduit not more than 6 m (20 ft.) in length.
Part numbers D9124G, D9124GV2, D7412G, D9412G, D7412GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, B8512G, B9512G, D8128D, B600