How to Wire the F220 Popit Bases

[#1]

 Ignore the Yellow, Black & Red wires inside the base, wire per the installation guide Figures 2, 3 or 4 depending on the base selected for the application.

Wiring for F220-B6PS 12/24VDC Popit Base

• (+) Power wires in and out of Terminal B2
• (-) Power Wires in and out of Terminal 5
• (+) Popit Loop Data wires to Terminal 1
• (-) Popit Loop Data wires to Terminal 2

Wiring for F220-B6PM 24VDC Popit Base

• (+) Power wires in and out of Terminal B2
• (-) Power Wires in and out of Terminal 5
• (+) Popit Loop Data wires to Terminal 1
• (-) Popit Loop Data wires to Terminal 2
• Connect the 3KΩ end-of-line (EOL) resistor Bosch P/N: 15-03130-007 (F.01U.008.725) across the Terminals A1/A2 and B1 at each base when not using 2-Wire slave bases.

Wiring for F220-B6PM 24VDC Popit Base with F220-B6 2-Wire Slave Bases

• (+) Power wires in and out of Terminal B2
• (-) Power Wires in and out of Terminal 5
• (+) Popit Loop Data wires to Terminal 1
• (-) Popit Loop Data wires to Terminal 2
• Connect the 3KΩ end-of-line (EOL) resistor Bosch P/N: 15-03130-007 (F.01U.008.725) across the last 2-Wire base (F220-B6 2-Wire Base) to Terminals A1/A2, and B1.

Terminals 1 - 5 Diagram

How to tell the difference between the F220-B6PS and F220-B6PM Base

 Base Assembly Diagram