How to set up Dual Factor Authentication (Card + Pin) APE

[#1]

1. Go to entrances and select ¨With keypad¨ option, then select:

• PIN code at entry reader select ¨Always¨ to enable verification at all times.
• ¨Per time Model¨ if verification is required on a specific time frame, ¨outside time model¨ or ¨outside time model at first use¨  if verification is required outside that time frame.

2. Go Configuration / Card definition and enable ¨PIN or Card¨ format.  

 

 3. Add a verification PIN Code for an specific user under personnel management software.

4. Operation mode present the card and type the PIN code followed by pound (#).