1. Turn on the D5200
2. Plug the programming cord into the communicator port on the top of the D5200 and the other end of the cord into the programming port on the panel.
3. Lock down the reset pin on the upper right hand corner of the panel and then press the "WHITE" enter key on the D5200
4. Scroll down with the "RED" down arrow key.
5. On the RADXAXS handler press "ENTER GROUP"
4. With the cursor flashing on new record press "RECEIVE COPY"
5. Press "ENTER GROUP" into the event profile tab.
6. Change access granted and no entry to a "YES"
7. Press "SEND LOAD"
8. Unplug the programmer from the panel and unlock the reset pin.