How is the D6112 armed and disarmed?
Arming Your Security System
Your security system can be armed in many different ways, depending on the arming command used. Arming commands are those commands used to arm the system. The most basic arming command is to arm the entire system. This is done by entering your personal passcode and pressing ENT or by entering COMMAND 1.
To ARM your security system:
Enter your personal passcode and press ENT or enter an Arming Command. Your system may be programmed to send a "closing" report to the Central Station when arming.
Disarming Your Security System
Your security system is disarmed by entering your personal passcode and pressing ENT. When your system is armed, you must enter the premises through a designated entry door to prevent an immediate instant alarm condition. Opening the door starts an entry delay time and the Command Center emits a pulsing "beep" tone to remind you to disarm the system. Entering your personal passcode and pressing ENT before the delay time expires and the system will disarm. If you enter through a wrong door or fail to disarm the system before the entry delay expires, you will generate an immediate alarm.
To DISARM your security system:
Enter your personal passcode and press ENT. Your system may be programmed to send an "opening" report to the Central Station when disarming.