Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 

    How to Arm Perimeter with Delays CMD 3 D6112, D4112


    Arming perimeter with delays

    Arm the Perimeter with Delays

    COMMAND 3 is used to arm only the perimeter of your building, leaving the interior of the building disarmed. Once you have entered COMMAND 3, the exit delay time starts. You now have a predetermined amount of time to leave before the perimeter arms. Although this command does not send a "Closing Report" to the Central Station, it will still send alarms. Enter your personal passcode and press ENT to cancel COMMAND 3.


    This arming command is useful in residential systems when you are leaving, but members of your family, a babysitter or a pet are still inside the house. In commercial installations, use this command to rearm your system when you are on the premises, but not yet open for business. This command will not send a "Closing Report" to the Central Station.

    Arming with COMMAND 3:

    1. Ensure that all perimeter zones are secure (interior zones are not armed with this command and may remain faulted while arming with COMMAND 3).
    2. Press the COMMAND bar. The Command Mode indicator light comes on.
    3. Press the 3 key. The PERIMETER indicator light flashes. This indicates that the system has begun exit delay time. When the delay time expires, the light remains steady.
    4. To disarm your security system or cancel COMMAND 3, enter your personal passcode and press ENT before the delay time expires.

    Version history
    Revision #:
    1 of 1
    Last update:
    ‎07-11-2018 05:44 PM
    Updated by:
    Labels (1)