Add or Change a user's passcode or authority level:
- 1. Enter the [master code] + [# 0].
- 2. Enter the user number of the user to add or change followed by the function digit, new user code and #.
- For example: UU/F/CCC/#, where UU=User Number, F=Function Code (see below) and CCC=User Code.
- Enter: [0 2 0 2 2 2 #] = User: 2, Authority Level: 0, Code: 222.
Function Digit (Authority level):
- 0 = Arm only, with bypass privileges.
- 1= Arm and disarm, with bypass privileges. (The master code, user code 1, requires a function of 1).
- 2= Temporary code; arm only, with bypass privileges.
- 3= Temporary code; arm and disarm with bypass privileges.
- 4= Arm only, without bypass privileges.
- 5= Arm and disarm, without bypass privileges.
- 6= Temporary code; arm only without bypass privileges.
- 7= Temporary code; arm and disarm without bypass privileges.
- 8= Read back users code in this slot.
- 9= Access control code. Operates access control output.
