Dip switches 1 and 2 select sensitivity settings:
4 pulse counts is the recommended setting for locations where an intruder is expected to cover a sizable portion of the protection area. The detector tolerates harsh environments at this setting.
3 pulse counts is for locations where normal environmental transients are expected.
2 pulse counts is the normal setting for areas where thermal and illumination transients are minimal.
1 pulse count is for fast response to intruder signals. It is for use in quiet environments where thermal and illumination transients are not anticipated.
- Pulse Counts Switch 1 Switch 2
- 1 OFF OFF
- 2 ON OFF
- 3 OFF ON
- 4 ON ON
Detection Range Adjustment:
- Used to fine tune sensitivity. Adjust for lowest sensitivity that provides good catch performance.
