How to arm multiple areas with the Master Arm All command.

[#1]

Use the Menu function ‘MASER ARM’ to arm either selected areas or all areas that the user has authority in, which are in the scope of the keypad.  Previously armed areas remain armed while the remaining disarmed will arm. 

For example, if a panel uses areas 1-8 and:

• The keypad has Panel Wide Scope and the user has authority only in areas 1, 2, 3 & 4, then only areas 1, 2, 3 & 4 will Master Arm.
• If the keypad has Custom Scope in areas 1 & 2 user has authority in areas 1, 2, 3 & 4, then only areas 1 & 2 will arm.

Use the Menu function ‘MASER ARM’:

1. Access the keypad Menus from the keypad.
2. Press the NEXT key until the MASTER ARM ? function is displayed and select [ENTER].
3. Enter a valid passcode and press [ENTER].
4. The display shows MASTER ARM ALL ?, select [ENTER].
5. The command center displays ARMING X,X,X,X…  where X= the available and authorized areas to arm.