When pSwinger Bypass is set to YES, the control panel automatically bypasses a point that erroneously reports a pre-determined number of alarm or trouble events within an hour.
The panel will report a SWINGER BYPASS P### upon meeting the swinger count. If the point has a partial count (less than the maximum number during an hour), the count is reset to zero
Points do not need to be programmed as Bypassable YES for swinger bypass to work. A swinger shunted point will return to the system if P## BP Returnable? is YES. If not, return the point to the system by performing the normal procedure to unbypass a point. Press CMD 00 and enter the point number or press Next to access the next bypassed point, then press Enter to unbypass the point.