Important Cookie Information

This website uses absolutely necessary cookies. If you consent to the use of convenience cookies, please click “Yes, I agree.” By clicking on “Privacy Settings.” you can change this setting at any time and withdraw your given consent. Icon down see more You can find detailled information in our Privacy Policy Icon forward-right
Icon up see less

Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 

    How to correct confusing point or user reports, for example; points 1-9 reporting as 101-109.

    When the Point/User Flag parameter is set to YES in 7000/9000 and G-GV4 panel types , point and user numbers will report in COMEX format which will appear different than normal.

    Points 1 - 9 report as 101 - 109 instead of 001, 002, 003..., also users will report in a non-standard format (see below).  Change the Point/User Flag parameter from YES to NO to send point and user reports in the standard manner described in the tables below.

    The Point/User Flag parameter is located in Panel Wide Parameters under Phone Parameters

    • The Point/User Flag parameter determines how point and User ID numbers are presented at the D6500/D6600 display, printer, and computer RS232 output. Setting Point/User Flag to NO will configure the control panel to report points as sequential numbers from 001 to the end of the parameter range. 
    • Setting the Point/User Flag parameter to YES causes the control panel to send a "flag" with each report telling the D6500/D6600 to convert point numbers and User ID numbers to COMEX format. The conversions are shown in the tables below.

    Users reporting in COMEX format.png

    Points reporting in COMEX format.png


    Version history
    Revision #:
    3 of 3
    Last update:
    ‎06-08-2018 05:56 PM
    Updated by: