How to correct the D4412/D6412 only reports to one destination and not following programmed routing.

[#1]

• The D4412 and D6412 provides an ability for individual areas to send reports to only one of the two programmed destinations rather than follow standard routing. 
• The setting described below in figure 1 displays how to Lock Area Programming to either Destination 1 or Destination 2.  To revert back to standard routing, select Disabled in this parameter.

Using keypad programming, make a selection in the desired area as using the programming nibble as described below .   Default setting=0 (Disabled).

• Area 1:  0297
• Area 2 (D6412 and D4412 only): Nibble: 0319
• Area 3 (D6412 only): 0341
• Area 4 (D6412 only): 0363

Nibble Selections:

• 0 = Disabled
• 1 = Destination 1
• 2 = Destination 2