How to modify the B465 Network Access Point Name (APN) entry.

[#1]

NOTE: After completing the below steps, select SAVE & EXIT before exiting TeraTerm or all changes are lost.

1. Open TeraTerm.
2. The New connection dialogue opens.
3. Select the Serial radio button and choose the port configured for the B465. Press OK.
4. Press the ENTER key and the display reads [Enter Passcode].  Enter the default Log-in password: B465.
5. Select 3 > Advanced Communication Configuration
6. Select 4 > Cellular Setup
7. Select 1 > Cellular Plug-in Module
8. Select 1 > Network Access Point Name (APN).
9. Enter the correct APN for the type of cell card to be used:
   
   1. B444 (Verizon): [eaaa.bosch.vzwentp].
   2. B443-ATT (AT&T): [wyless.com.attz]
   3. B443-TMO (T-Mobile): [GNE]
   4. [B443-ROG (Canada): [wyless.apn]
10. Select SAVE & EXIT before exiting TeraTerm or all changes are lost.