How to setup DS7400 Series Test Timer and Send Test Report Pin #81

[#1]

Issue

The DS7400 panel is programmed to send test reports every day. Test reports are not being sent but when Pin + #82 is pressed to send a communicator test, the receiver gets a Contact ID signal of 601 for Manual trigger test report.

Solution

Reset the panel time. If the DS7400 panel looses time, for example due to loss of power, the clock function is turned off and the panel will no longer send test reports. When the panel time is reset, test reports will resume sending.

To  send a Test to the central station - Enter a Valid Pin Code #81

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+,