Overview
Unbypassing a point is a way to return a bypassed point to the security system so that it can once again respond to trouble and alarm conditions.
Issue
How do I unbypass a point?
To unbypass a point:
1.) Ensure the command center is at disarmed idle text.
2.)Press the COMMAND key. The display shows SYSTEM COMMAND.
3.) Press the 0 key, then press the 0 key again. Note: If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU key to enter the Command Menu, then press NEXT repeatedly until you reach the UNBYPASS A POINT prompt. Press ENT.
4.) The display shows ENTER PT NUM.
5.) One of the following messages displays:
7.) To confirm that the point is back in the system, press a number key at idle disarmed text and view the scrolling list of currently faulted and bypassed points.
8.) If the point now displays as faulted it will not completely return to the system until the door or window is shut.
9.) If the unbypassed point was the last bypassed 24-hour or fire point, the messages 24 HOUR BYPASS or FIRE BYPASS automatically clear.
Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D7412G, D9124G, D9412G, D7412GV2, D7412GV2, D9124GV2, D9412GV2, D7412GV3,D7412GV3, D9412GV3, D7412GV4, D7412GV4, D9412GV4, B8512G, B9512G,