About CPrince

Issue What is the value of the EOL on a DS7090?   Solution   The EOL value on the DS7090 = 2.2K ohms. ... View more

Issue Display on the keypad displays Report Failure X. Solution The control panel has failed to communicate Need to view the history log to determine the soure. Report failure 1 = phone number 1 Report failure 2 = phone number 2 Report failure 3 = phone number 3 ( remote programmer) Report failure 4 = phone number 4 ( Ardis ) Report failure 0 = If closing ring-back is enabled and no closing report is programmed, the panel will check for dial tone. if no dial tone is detected the panel will cause a report fail 0. Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+, ... View more

Issue In the history log, the panel displays armed by user 202   Solution   The system was remote armed through the software. ... View more

Issue The history log displays armed and disarmed by user 99 Solution User 99 is keyswitch arming.   Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+, ... View more

Issue How is the battery test performed?   Solution   Type in (Command/ # ) 80 or a valid code # 80. If you want the sounder to trip with the battery test, type in #85. If the Green power LED contiunes to flash after 10 seconds, the battery has failed and needs to be charged or replaced. If the LED goes solid, the battery has passed. ... View more