About CPrince

Issue How can Force Arming the D4412/D6412 be disabled on Command Centers? Solution It is not possible to disable force arming on keyfobs. To disable force arming at Command Centers on the D4412/D6412: 1) Go to PANEL WIDE PARAMETERS, Global Open/Close Options and Arming Options and find 'Bypass/Force Arm Limit and change from Unlimited (default) to 1 Point. 2) Go to POINT PARAMETERS and Point Index Configuration. For all programmed points in the panel, ensure Bypass/Force Arm (Yes/No) is set to No. ... View more

Issue Entering #87 on keypad displays AC power failure. Solution The transfomer is unplugged. The wiring from the transformer is defective. The circuit to the transformer is off or defective. The transformer is defective. The transformer may be connected to a circuit controlled by a switch or a circuit breaker that is periodically turned off. Plug the transformer in. Check the wiring. Check the circuit and circuit breaker. Replace the transformer. Connect to a circuit that is not controlled this way. Make sure the transformer is less than 50ft from the panel. Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+, ... View more

Issue How may users can the Easy Series panel hold?   Solution   The panel will hold up to a total of 22 users: 1:  Master user 2 to 21: System users User 22: Duress user ... View more