About CPrince

 Issue The action of Plant Warning is not lighting the supervisory LED on the D9024 Solution Panels using firmware 6.60 or below: in order for Plant Warning to light the supervisory LED on the panel, map event 100 to each supervisory point. This will enable the supervisory LED to work on the D10024A, D10024, D9024 and 8024 panels. EPROM revision 6.84 and up: programming the point as Sprinkler point will cause the Supervisory Sprinkler LED to ight on alarm. Part numbers D10024A, D10024, D9024, D8024 ... View more

The display backlight will come on when there is an active alarm, trouble, or supervisory present. It will also be on when in programming, in test mode and if a key is pressed when the panel is in normal condition the backlight will come on. Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, DS9447, DS9436, D7033, D7036, FMR-7033, FMR-7036 ... View more

Issue What is the operating temperature range of the FMM-100 Series pull stations?   Go to the Bosch website www.boschsecurity.com for more information on Bosch Pull Stations   Part numbers FMM-100SAT2CKEX, FMM-100DAT2CK-B, FMM-100SAT2CK-B, FMM-100SAT2CK-G, FMM-100SAT2CK-Y, FMM-100SATK, FMM-100SATK -NYC, FMM-100DATK ... View more

Neither UL nor NFPA requires a hardwired transformer for commercial fire applications, they only require that the transformer to have some form of mechanical protection.  To meet this specification the D8004 transformer enclosure is required to meet UL Fire Installations. Part numbers D7212, D7412, D9112, D9412, D7412G, D9412G, D7412GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, B8512G, B9512G ... View more

Issue Is it possible to remove unused points turn onboard points and MUX points from the panel program? Solution The onboard zones will always be monitored by the panel regardless of programming.  If the onboard points will not be used, simply strap them out with a 2.2K Ohm EOL resistor. MUX Points 9 - 255 need to be remove from MUX program. In RPS or keypad programming set the address to No Device. Part numbers FPD-7024, D7024, DSS9400, DS9400I, DS9400M   ... View more