About David

B,B1 Series, G Series D8125 POPEX [Date Stamp X-9434 or Higher]. D8127 [Date Stamp X-9344 or higher]. ALL - D8126 POPITs. ALL - D9127 POPITs.  GV2 Series  D8125 POPEX [Date Stamp X-9434 or Higher]. D8127 [Date Stamp X-9344 or higher]. ALL - D9127 POPITs.  GV3 & GV4 Series  D8125 POPEX [Date Stamp X-9434 or Higher]. ALL - D9127 POPITs. ... View more

GV2 with firmware version 7.08 and higher, GV3 and GV4 panel types have the ability to manually turn onboard relays On or Off using the Command 54 operation.   Select onboard relay A, B or C by entering the relay number as described below: On-Board Relay Relay Number Mapped Relay Number* A (terminal 6) 253 250 B (terminal 7) 254 251 C (terminal 😎 255 252   The error tone will sound when a relay number outside the available range of relays is entered. Only GV2 ver 7.08+, GV3 and GV4 panel types allow selecting relays 253, 254 or 255.  The available relays using expansion are listed below: D7212/G/GV2/GV3/GV4:  Relays 1-24 D7412/G/GV2/GV3/GV4:  Relays 1-64 D9412/G/GV2/GV3/GV4:  Relays 1-128   ... View more

The number of connected B208 modules does not limit the allowed number of B308 modules that can be connected to the control panel. Note: An auxillary power supply such as the B520 may be required when connecting multiple devices to the control panel.     B3512    B4512     B5512    B6512     B8512G     B9512G D7412GV4 D9412GV4 B208      0      2      4        9      59         7         24 B308      0      3      5        9      59         6         12 ... View more

  The control panel can use multiple network interfaces for use with network reporting, remote programming software or automation.  9000Series thru GV2: Up to (2) Network interface cards allowed. RPS: SDI88. Automation Software: GV3 Series: Up to (3) Network interface cards allowed. RPS: SDI88 or SDI92. Automation Software: GV4 Series: Up to (3) Network interface cards allowed. RPS: SDI2 address 1 or 2, SDI 88 or SDI 92. Automation Software: SDI2 address 1 or 2, SDI80. B8512G/B9512G: Up to (2) Network interface cards allowed. RPS: SDI2 address 1 or 2. Automation Software: SDI2 address 1 or 2. B-Series: (1) Network interface card allowed. RPS: SDI2 address 1. Automation Software:  SDI2 address 1. ... View more

The App was working for the GV4 Version 1 panels until the App updated to revision 2.5.0(xx) on iDevices and or Android Devices - now when the customer attempts to connect to the GV4 V1 panel, the app reads "System is Disabled". Workaround: Delete existing certificate from device, then re-open email from previous cert and re-import into the application. Or- Create a new certificate for the panel.   ... View more